N12633 is a 1966 Cessna Ector 305A. It is a fixed-wing single-engine aircraft with 2 seats, powered by a Cont Motor O-470 series rated at 230 horsepower. The registration is active, with the registrant based in Ridge, NY. Its standard airworthiness certificate was issued in May 1967. It has been registered to its current owner since Oct 2015. This page also carries 1 NTSB event.
- 60 years old
- Only 22 Cessna Ector 305A here
2015
1967
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N12633's record changes.
According to the pilot of the tailwheel equipped airplane, the airport Universal Communications (UNICOM) operator advised the active runway as 33, and he did not listen to the automated weather broadcast. The pilot performed a two-point (main wheel) landing to the asphalt runway, and the airplane initially tracked straight, slightly right of centerline. As it decelerated, the tailwheel touched down and the airplane began to turn left. The pilot applied right rudder, with no effect. He then applied the right brake, but the airplane kept turning to the left. It then slid sideways, and the right main landing gear folded, damaging the outboard section of the right wing as it contacted the runway. When the pilot disembarked, he noted that he had landed with a quartering tailwind. Wind, recorded at the airport about the time of the accident, was from 190° true at 7 knots, and runway 24 was available. The pilot reported that there were no preimpact mechanical malfunctions or failures with the airplane that would have precluded normal operation. In retrospect, he noted that he landed on an advised runway instead of determining actual winds to land on the most appropriate runway.
No photos yet. Sign in to add the first one.