N168SLPiaggio Aero Industries Spa P180 · 2007

On November 16, 2011, approximately 0940 eastern standard time, a Piaggio Aero Industries S.p.A. P180 airplane, N168SL, operated as Avantair, Inc., flight 168, impacted terrain during a runway excursion at the Bishop International Airport (KFNT), Flint, Michigan. The captain, first officer, and two passengers sustained minor injuries. The airplane sustained substantial damage. The flight was being conducted under 14 Code of Federal Regulations Part 91 subpart K. Visual meteorological conditions prevailed and an instrument flight rules flight plan was filed. The airplane departed the Detroit Metropolitan Wayne County Airport (KDTW), Detroit, Michigan, at 0906, and was destined for the West Bend Municipal Airport (KETB), West Bend, Wisconsin.

According to company and maintenance records, the airplane arrived at Toronto Pearson International Airport (CYYZ), Toronto, Canada, on November 14th. After the flight, the flight crew (which included the accident flight first officer) noted in the airplane flight logbook a problem with excessive generator amperage split and the left engine power lever would not go into beta or reverse. At the request of the company, a local maintenance company was contacted to perform corrective action. On November 15th, maintenance personnel performed corrective actions. The corrective actions to the generator were: Left and right generator control units were removed, ground points cleaned, and units were swapped in accordance with the airframe maintenance manual. The corrective actions to the left power lever were: the left power lever system was cleaned, inspected and lubricated and ground runs were performed in accordance with the airframe and engine maintenance manuals. The airplane was then returned to service.

On November 16th, the airplane departed CYYZ and flew for approximately 50 minutes to KDTW. No discrepancies were noted by the flight crew during that flight.

According to the cockpit voice recorder (CVR) transcript and crew statements, at 0925 while climbing through flight level 220 to KETB, the crew noted the left engine torque was 94% and needed to be increased for the climb. The captain attempted to move the left engine power lever; however, he noted resistance. The first officer stated, "that's what it was doing the other day too." The captain applied additional pressure to the lever, a pop sound was heard, and the engine began to over torque and over temp. The captain decided to shut down the engine, declare an emergency, and divert to KFNT.

Shortly after the left engine was shut down, the crew noted that both primary flight display screens went blank. The captain reset the right generator and the flight displays regained power and display. During the descent, the crew noted a 50 degree difference in the heading indications which they attributed to the instrument gyros resetting themselves. The captain stated he was unable to verify runway direction with the heading indicators. At 0930, the crew contacted KFNT approach control. The first officer explained the emergency and requested the recommended runway. The controller replied, "...we're doing visual approaches to runway two seven today. The current wind is three zero zero at one five [knots]..." The first officer acknowledged runway 27. The first officer then informed the passengers they were landing at KFNT because they shut down the left engine.

At 0932:15, approach control instructed the crew to fly heading 080. The first officer then stated the 080 heading to the captain and asked, "Where are you going?" The captain then turned on the autopilot. At 0933:45, approach control instructed the crew to turn right heading 090. The crew then began the single-engine descent and approach checklists. At 0934:19, the first officer reported the airport in sight and they were going to "make ah circle around for two seven." Approach control cleared the airplane for landing runway 27 and asked the airplane to report turning onto the base leg of the visual approach. The crew then continued with the checklists.

At 0936:26, the captain told the first officer he was descending to 3,000 feet mean sea level (msl) and in a left turn to base. The first officer stated, "we're not turnin' base." Between 0936:33 and 0939:11, there was discussion between the crew regarding to which runway they were tracking towards and discussion between the first officer and KFNT tower to which runway they intended for landing. At 0938:31, the first officer asked the tower controller, "ah yes ma'am ah now we're just noticing our gyros are ah messed too our...are we ah on base for two seven?" The tower controller did not reply to the first officer. At 0939:08, the tower controller cleared the airplane to "land any runway." The first officer responded to the control tower "ah we're takin' this one here. We're turnin' base to final." The tower controller reported the wind was from 290 degrees at 18 knots.

The sound of touchdown was recorded at 0940:21 on runway 18 (7,848 feet by 150 feet). At 0940:30, a sound similar to the propellers transitioning into beta/reverse was recorded. The captain reported he brought the right power lever aft and into beta. He applied left rudder and the airplane veered to the right. The captain stated that he "took out some reverse, then I applied with enough to get us slowed down." The airplane went further right and the captain applied full left rudder and left brake. He reported the engine sounds during reverse were different than usual. The airplane departed the runway surface near the 4,000-feet-remaining runway marker, flipped over, and came to rest inverted. The four occupants exited the airplane with the assistance of airport rescue personnel. The flight crew reported they did not engage the nosewheel steering during the landing.

The captain held airline transport pilot and commercial pilot certificates. On the airline transport pilot certificate he had an airplane multi-engine land rating, and on the commercial certificate he had an airplane single-engine land rating. He was issued a first class medical certificate on November 10, 2010. On the NTSB Pilot/Operator Aircraft Accident/Incident report, the company indicated the captain had 3,851 total flight hours, and 2,023 flight hours in the accident make and model airplane, with 113 listed as pilot-in-command. The captain's last flight review was completed on June 8, 2011.

The first officer held airline transport pilot and private pilot certificates. On the airline transport pilot certificate he had an airplane multi-engine land rating, and on the commercial certificate he had an airplane single-engine land rating. He was issued a second class medical certificate on February 14, 2011. On the NTSB Pilot/Operator Aircraft Accident/Incident report, the company indicated the first officer had 3,957 total flight hours, and 259 flight hours in the accident make and model airplane, with 0 hours as pilot-in-command. The first officer's last flight review was completed on July 17, 2011.

The airplane was manufactured in 2007 by Piaggio Aero Industries S.p.A. as model P180, and designated serial number 1139. It was powered by two 850-shaft-horsepower Pratt & Whitney PT6A-66B engines and equipped with two Hartzell HC-E5N five-bladed propellers.

The airplane was maintained in accordance with an approved continued airworthiness inspection program. On November 9, 2011, a "C" check was completed at a total airframe time of 4,422 hours. During the "C" check, an inspection of the engine controls, levers, cables, and power level switch was performed in accordance with the airframe maintenance manual, which did not require the disconnection of any linkage or cables.

The left engine was installed on the airframe on August 20, 2011.

At 0953, the KFNT automated surface observing system reported the wind from 280 degrees at 16 knots, visibility 10 miles, sky clear, temperature 4 degrees Celsius, dew point minus 3 degrees Celsius, and an altimeter setting of 29.91 inches of Mercury.

The airplane was equipped with a L-3 Communications CVR, model FA 2100-1010, serial number 000330603, which recorded and retained the most recent 30 minutes of CVR operation. The four channels of audio are stored in solid-state memory modules. Of the four channels of audio information, one is for each flight crew member, and one channel is for the cockpit area microphone (CAM); the fourth channel is not used.

Inspection of the CVR revealed no damage, and the audio information was extracted from the recorder normally without difficulty. The recordings from each flight crew member audio panels were excellent quality, while the audio channel from the CAM was fair quality.

Timing on the CVR transcript was established by correlating the air traffic control recording transmission time to the corresponding CVR event.

The CVR group meeting convened on November 23, 2011, and a partial transcript was prepared for the last 24 minutes, 2 seconds of the 31-minute, 4-second digital recording.

Postaccident examination by Federal Aviation Administration inspectors of the accident site and airplane showed tire skids marks beginning near the runway centerline approximately 3,250 from the approach end of the runway. The tire skid marks continued in a right arc pattern until the airplane departed the runway surface, approximately 4,100 feet from the departure end of the runway. Tire skids marks, consistent with the nosewheel, led to the impact of the 4,000-foot runway-remaining sign for runway 18. Approximately 65 feet from the sign, a ground scar, consistent with the left wing, was observed. The airplane came to rest inverted 83 feet from the ground scar.

The left wing was partially separated outboard of the engine. The forward fuselage, including the left and right canards, was fragmented. The empennage, aft of the rear bulkhead, was partially separated from the fuselage. The left propeller was found in the feathered position.

Examination of the left engine revealed that the Beta clevis pin was installed in reverse, which caused an interference with a fuel control unit interconnect rod. Due to the interference, the power lever control linkage was jammed in the full power position.

Inspection of the generators and the electrical system revealed no anomalies.

Due to airframe and system damage, the nose landing gear assembly could not be tested and was removed for further examination.

Nose Landing Gear Assembly

From January 31 to February 1, 2012, the nose landing gear assembly and nosewheel steering system were examined at the facilities of Aero Precision Repair and Overhaul under the supervision of the NTSB investigator-in-charge. The nose landing gear assembly was installed on a test fixture and testing in accordance with the manufacturer's component maintenance manual was completed. During the test, an uncommanded right turn of the nose landing gear occurred. Examination of the steering actuator revealed the follow-up potentiometer was damaged. A replacement steering actuator was installed and no anomalies were noted with the remainder of the nose landing gear assembly test.

The steering actuator was disassembled. Water was found within the actuator piston dry area, which also contained the follow-up potentiometer. The feedback potentiometer was inspected and damage on the wire harness, consistent with the impact and/or airplane recovery, was noted. One wire was found broken within the wire insulation, and two additional wires were found crimped.

No anomalies were noted with the nose landing gear assembly that would have precluded normal operation prior to the impact with terrain.

Airplane Flight Manual

The following excerpt is from the airplane flight manual single-engine approach and landing procedure, after touchdown:

9. Brakes and reverse - AS REQUIRED

10. Landing distance - INCREASE the flaps DN landing distance approximately:

30% if reverse thrust is not applied, or

25% if reverse thrust is applied