N1935CFlight Design Gmbh CTLS · 2013

The pilot turned right base with the intention of landing at a grass strip adjacent to the runway. During the turn a glider reported that it was on the left downwind for the same landing area. The pilot then elected to overshoot the final turn in order to allow room for the glider to land. During the final turn, the pilot allowed the airspeed to decay and the airplane began to stall. He applied full engine power, but the airplane descended to ground impact collapsing the right main landing gear. The airplane sustained substantial damage to the forward fuselage during the accident sequence. No mechanical anomalies with the engine or airframe were observed.

The pilot was landing the airplane on a 1,350-foot-long turf runway. On touchdown, the airplane veered right. The pilot added power and the airplane became airborne. The airplane touched down a second time and again veered. The pilot applied full power but there was insufficient room for a go-around or safe stop. He reduced power, and the airplane overran the runway and collided with a rock pile. The right main landing gear separated and the fuselage sustained structural damage.