N2010P is a 2020 Costruzioni Aeronautiche Tecna P2010. It is a fixed-wing single-engine aircraft with 4 seats, powered by a Lycoming IO-390-C3B6 rated at 215 horsepower. The registration is active, with the registrant based in Enid, OK. Its standard airworthiness certificate was issued in Jun 2020. It has been registered to its current owner since Mar 2025. This page also carries 1 NTSB event.
- 6 years old
- 1 of 83 Costruzioni Aeronautiche Tecna P2010
2025
2020
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N2010P's record changes.
The pilot reported that, she had returned to her departure airport after completing about 20 practice landings at a nearby airport. During her first attempt to land she noted that the crosswind was too strong and decided to initiate a go-around. The wind direction had changed, so she selected a runway that favored the new wind direction. However, during the landing attempt she encountered “wind shear” just before the airplane touched down. The airplane landed on the main landing gear, bounced and impacted the ground hard, which resulted in substantial damage to the fuselage. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.
No photos yet. Sign in to add the first one.