N2134MCessna 172S · 2003

On May 13, 2026, about 1815 central daylight time, a Cessna 172S, N2134M, sustained substantial damage when it was involved in an accident near Denton, Texas. The pilot was not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

The pilot reported that during takeoff roll the airplane hit something on the runway (later determined to be a gas cap from another airplane) that caused the airplane to become airborne below normal rotation (Vr) speed. The pilot stated that he attempted to reduce airplane pitch by pushing the yoke in, but the yoke was stuck and would not move. The airplane drifted to the left which the pilot attempted to counter with aileron and rudder input. Since he was unable to lower the nose of the airplane, and he was only about 5 to 7 feet above the ground, he elected to reduce engine power and the airplane impacted the ground.

During a practice touch-and-go landing, the student pilot did not properly maintain runway alignment during the landing flare. The flight instructor took control of the airplane as the wheels touched down on the runway, and attempted a go-around. However, during the go-around, the flight instructor did not retract the flaps to 20 degrees, which the normal procedures require. Subsequently the airplane bounced, landed in an open area adjacent to the runway, and came to rest upright. During the accident sequence, the airplane sustained substantial damage to the wings and horizontal stabilizer. The flight instructor reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation.