N21NC is a 1976 Piper PA-23-250. It is a fixed-wing multi-engine aircraft with 6 seats, powered by a Lycoming TI0-540 SER rated at 310 horsepower. The registration is active, with the registrant based in Oklahoma City, OK. Its restricted airworthiness certificate was issued in Jan 1994. It has been registered to its current owner since Nov 2018. This page also carries 1 NTSB event.
- 50 years old
- 1 of 924 Piper PA-23-250
2018
1994
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N21NC's record changes.
While on the downwind leg of the airport traffic pattern for runway 17, the pilot was advised over the airport traffic frequency that winds were favoring runway 35. The pilot elected to continue the approach to runway 17, since he could "clearly see the wind sock," which was indicating a "direct crosswind." During the landing flare, the pilot encountered an "updraft" and landed approximately "half way" down the 3,500-foot long runway. Upon touchdown, he retracted the wing flaps, applied "very strong" pressure on the brakes, and made "shallow turns" in an attempt to stop the airplane. The airplane ran off the end of the runway, and came to rest in a ditch approximately 10 to 20 feet beyond the runway edge. A Federal Aviation Administration inspector who examined the airplane after the accident reported that it sustained substantial damage to the engine firewall, and exhibited extensive wrinkling and buckling of the fuselage, particularly at the wing roots. The pilot reported no mechanical anomalies. The nearest weather reporting station, located 12 nautical miles northwest of the accident site, reported wind direction variable between 280 degrees and 350 degrees at 7 knots at the time of the accident. The pilot stated that he should have landed on runway 35, since there were "several hills" on the approach to runway 17, and "turbulence and updrafts made speed control and altitude control difficult." In addition, runway 17 had a "downhill slope."
No photos yet. Sign in to add the first one.