N233TDThomas J Murray KITFOX SUPER SPORT · 2014

According to the pilot in the experimental amateur built, tailwheel-equipped airplane, he touched down on a turf surface runway and the airplane bounced.

When the airplane descended to the surface, the right main landing gear wheel and brake assembly separated from the landing gear leg. The pilot reported that the airplane "skidded down" the runway and nosed over.

He reported that he had recently installed tundra tires on the airplane, and that the four bolts that came with the tundra tire kit, were not long enough to properly secure the wheel and brake assembly to the landing gear leg. He recalled that he used four bolts that were longer, however, they were not provided by the manufacturer. He asserted that the nuts that were used to retain the bolts were provided in the wheel assembly kit.

The airplane sustained substantial damage to the right-wing strut and the left-wing spar.