N272WY is a 2016 Aviat Aircraft A-1C-180. It is a fixed-wing single-engine aircraft with 2 seats, powered by a Lycoming O-360-A1P rated at 180 horsepower. The registration is active, with the registrant based in Eden Prairie, MN. Its standard airworthiness certificate was issued in Dec 2016. This page also carries 1 NTSB event.
- 10 years old
- 1 of 239 Aviat Aircraft A-1C-180
2016
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N272WY's record changes.
On July 4, 2017, at 1130 eastern daylight time, an Aviat Aircraft Inc. A-1C-180, N272WY, was substantially damaged when it impacted terrain in Dillwyn, Virginia. The private pilot was seriously injured, and one passenger sustained minor injuries. The airplane was registered to and operated by the pilot under the provisions of Title 14 Code of Federal Regulations Part 91 as a local, personal flight. Day, visual meteorological conditions prevailed at the time, and no flight plan was filed.The pilot reported that he filled the airplane with fuel and departed his home airport for a private, paved airstrip about 12 miles to the northwest. He was encouraged to visit a neighbor who owned a grass airstrip located between the departure and destination airports, so he attempted to find the airstrip. He "falsely identified" the grass airstrip and attempted to land. He attempted two low approaches, the first with no flaps and the second with full flaps. On the third pass, he attempted to land the airplane with full flaps. After touching down, he realized that he did not have sufficient runway remaining to stop, and aborted the landing. Shortly after takeoff and after clearing the trees, the airplane "entered an abrupt stall" and impacted the ground.
The pilot believed that he was at full power when airplane control was lost. He also stated that there were no mechanical malfunctions or anomalies that would have precluded normal operation of the airplane.
An inspector with the Federal Aviation Administration reported that the airplane came to rest in a steep, nose-low position in a cornfield. There was no fire. Structural damage to both wings and the fuselage was confirmed. The inspector reported that the field where the pilot was attempting to land was a grass strip designed for radio-controlled model aircraft. The strip was oriented to the northeast/southwest, was about 650 ft in length, and was not intended for general aviation aircraft. A large stand of trees formed the boundary of the northeast end of the runway.
No photos yet. Sign in to add the first one.