N2943C is a 1954 Cessna 180. It is a fixed-wing single-engine aircraft with 4 seats, powered by a Cont Motor O-470 series rated at 230 horsepower. The registration is active, with the registrant based in Cambridge, MN. Its standard airworthiness certificate was issued in Dec 1955. It has been registered to its current owner since Jul 2020. This page also carries 1 NTSB event.
- 72 years old
- 1 of 1,204 Cessna 180
2020
1955
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N2943C's record changes.
The pilot and flight instructor conducted an instructional flight in a single-engine tailwheel airplane. The pilot had recently purchased the airplane and needed a tailwheel endorsement. After some ground instruction, they performed taxi and high-speed taxi operations in the airplane. They then flew to another airport, where they performed six take-off and landings to a full stop on a grass runway. En route back to their original airport, they stopped at another airport which had a grass runway and performed another seven takeoffs and landings. They then returned to the original airport, where the pilot completed a landing and takeoff from an asphalt runway. During the final landing to runway 34, the airplane bounced, and bounced a second time, before the airplane ground looped. The airplane came to rest inverted beside the runway, and substantial damage was noted to the airplane's empennage and wing. A review of the weather conditions about the time of the accident noted wind at 220 deg; at 5 kts. Using runway 34, the airplane would have experienced a slight quartering tailwind condition during landing.
No photos yet. Sign in to add the first one.