N484AB is a Robinson Helicopter R44 II. It is a rotorcraft with 4 seats, powered by a Lycoming IO-540-AE1A5 rated at 260 horsepower. The registration is active, with the registrant based in Uvalde, TX. Its standard airworthiness certificate was issued in Apr 2018. It has been registered to its current owner since Sep 2022. This page also carries 1 NTSB event.
2022
2018
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N484AB's record changes.
On January 8, 2019, about 1000 central standard time, a Robinson R44 II helicopter, N484AB, experienced a hard landing during an autorotation shortly after takeoff from Garner Field Airport, Uvalde, Texas. The flight instructor sustained minor injuries, the student pilot was not injured, and the helicopter sustained substantial damage. The helicopter was registered to and operated by a private individual as a Title 14 Code of Federal Regulations Part 91 instructional flight. Visual meteorological conditions prevailed at the time of the accident, and a flight plan was not filed. The local flight was originating at the time of the accident.
According to the flight instructor, all pre-takeoff checks were normal with no anomalies noted. Once the helicopter was through effective translational lift and about 40 knots airspeed, the collective was raised to increase the available power to takeoff power setting. Shortly thereafter, a loud pop/bang was heard followed by an uncommanded right yaw and severe vibrations. Due to the low altitude and airspeed, the flight instructor immediately initiated an autorotation. Upon touchdown, the helicopter tilted forward with the main rotor blades about 6 inches from contacting the ground. The flight instructor applied aft cyclic to correct, and the main rotor blades contacted the tailboom.
Postaccident examination of the helicopter revealed the tailboom was partially separated, and the tail rotor driveshaft system was damaged. During the examination, the clutch assembly lubricant was drained and an unusual amount of metallic debris was noted in the strainer. The clutch assembly was removed and sent to Robinson Helicopter Company for further examination.
Examination and disassembly of the clutch assembly revealed galling of the sprags and the corresponding sprag contact surfaces on the shaft and hub.
According to the Robinson R44 maintenance manual, the clutch assemblies are to be inspected for metallic flakes every 500 hours. The most recent inspection on the clutch assembly was completed on April 18, 2018, about 245 hours prior to the accident.
No photos yet. Sign in to add the first one.