N5932U is a 1971 Piper PA-28-140. It is a fixed-wing single-engine aircraft with 4 seats, powered by a Lycoming 0-320 series rated at 180 horsepower. The registration is active, with the registrant based in Bulverde, TX. Its standard airworthiness certificate was issued in Jan 1971. This page also carries 1 NTSB event.
- 55 years old
- 1 of 4,446 Piper PA-28-140
FAA recordRegistrant based in Bulverde, TX · ownership change in 2026.
2026
1971
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N5932U's record changes.
On October 20, 2020, about 2020 central daylight time, a Piper PA-28-140 airplane, N5932U, was substantially damaged when it was involved in an accident near Buda, Texas. The flight instructor and student pilot were not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 flight.
The flight instructor stated that while in cruise flight during the night training flight, the engine started to lose rpm, vibrate, and subsequently lost all power. During the descent, the flight instructor and student coordinated to select the closest runway and attempted to land at a private airport. After noticing the airplane was not able to the glide to the runway, the flight instructor conducted a forced landing onto rough terrain, which damaged the right-wing spar.
A postaccident examination revealed significant thermal damage to the engine, a nearly empty oil reservoir, and a disconnected oil line fitting to the oil pressure indicator. Oil residue was trailing on the underside of the fuselage and the bottom of the elevator surface. Examination of the oil line fitting revealed no material or structural anomalies with the oil line or fitting.
The accident was the airplane’s second flight following an engine overhaul due to a propeller strike. The two mechanics who conducted the overhaul stated that since both were involved and no procedure was in place to “verify all lines” were torqued properly, it was very possible the oil line fitting may have been missed.
Following the accident, the overhaul facility implemented a requirement to torque seal applicable components during an overhaul to ensure compliance with torque specifications. This best practice is described in NTSB Safety Alert SA-056, “Take Time to Torque” (available at https://www.ntsb.gov/Advocacy/safety-alerts/Documents/SA-056.pdf) as well as in a maintenance article highlighting the importance of proper torque protocols that was published in the July 2018 FAA Safety Brief (located in the docket for this investigation).
No photos yet. Sign in to add the first one.
About the Piper PA-28-140
About the modelA Cherokee: low-wing, fixed tricycle gear, with a constant-chord "Hershey bar" wing. Sold as a two-seat trainer and often flown four-up, it is one of the most numerous types on the registry.