N60111Cessna 150J · 1968

On June 27, 2018, about 1026 eastern daylight time, a Cessna 150J, N60111, was destroyed when it was involved in an accident near Manteo, North Carolina. The commercial pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 banner-tow flight.

A ground crewmember who was working in the banner pick-up area watched the accident airplane approach and line up with the pickup poles. He noted that the airplane was "very low" and estimated that the tail of the airplane was about 5 ft off the ground. The witness stated that, as the airplane flew through the pickup area, the pickup loop got caught around the left elevator. He recalled that the pilot made a radio call to the ground crew stating, "I can't turn, it won't release." He watched the airplane continue north and stated that, when the airplane was "barely over" the tops of the trees, the airplane made a climbing left turn. He noted that the wind was blowing from right to left and that it seemed to be "pushing" the airplane to the left. He watched as the airplane disappeared behind the tree line.

Another witness stated that she did not see the pickup of the banner but saw the airplane as it climbed out to midfield with the tow rope wrapped around the left horizontal stabilizer. She stated that the airplane was yawing to the left when it reached the end of the runway. The witness further stated that the airplane made a climbing left turn to an altitude of about 250 ft before it appeared to enter an aerodynamic stall and descend into the trees just to the left of the departure end of runway 23. The airplane wreckage was found in between trees adjacent to the airport perimeter.

On his medical certificate application, the pilot reported 150 hours of total flight experience and no hours in previous 6 months. The pilot's logbook was not recovered; therefore, his total flight experience at the time of the accident could not be determined. A review of the pilot's training records revealed he successfully completed a proficiency check for banner-tow operations on May 7, 2018.

The wind reported at MQI about the time of the accident was from 120° at 10 knots, gusting to 14 knots, which would have resulted in a nearly direct left crosswind when operating from runway 23.

One of the witnesses that observed the accident also was the owner of another banner tow company that operated at MQI. She characterized that the crosswind to runway 23 that prevailed on the day of the accident was "unusual." She further described that when she had flown earlier that morning the air was very turbulent.

The main wreckage was located about 400 ft from the departure runway 35 centerline on a 242° magnetic heading. The wreckage path was 124 ft long and oriented on a 242° magnetic heading. The airplane came to rest inverted and facing the direction of travel. The airplane sustained extensive compression damage to the forward fuselage, crushing the cockpit. The cockpit instrument panel was damaged by impact, which prevented an examination of the instruments. The right wing had trailing edge tree damage at the flap and aileron as well as leading edge crush damage throughout the length of the wing. The left wing was still attached to the airplane with part of the outboard section separated. The right elevator separated from the horizontal stabilizer. The banner-tow rope was wrapped around the leading edge of the left horizontal stabilizer. All flight control surfaces were located at the accident site. Flight control continuity was established from the cockpit to each flight control surface.

The engine was damaged by impact. The engine remained attached to the airframe at the tubular mount and was displaced aft and toward the left. The engine was partially disassembled to facilitate further examination. The engine was rotated by turning the crankshaft flange, and continuity of the crankshaft to the rear gears and the valve train was confirmed. Compression and suction were observed on all four engine cylinders. The interior of each cylinder was viewed using a lighted borescope, and no anomalies were noted.

The propeller remained attached to the engine crankshaft flange. The propeller spinner was fragmented. Examination of the propeller revealed that both blades remained attached to the crankshaft flange. Both blades were damaged; they were bent aft and had chordwise scoring throughout the blade span.

Examination of the flight controls and the engine revealed no anomalies that would have precluded normal operation.

The East Carolina University Brody School of Medicine, Division of Forensic Pathology, Greenville, North Carolina, performed an autopsy of the pilot. The pilot's cause of death was multiple blunt force trauma.

Toxicology testing performed at the Federal Aviation Administration Forensic Sciences Laboratory was negative for ethanol and drugs.