N612CB is a 2025 Cirrus Design SF50. It is a fixed-wing single-engine aircraft with 7 seats, powered by a Williams FJ33-5A. The registration is active, with the registrant based in Lilesville, NC. Its standard airworthiness certificate was issued in Mar 2025. It has been registered to its current owner since Mar 2025. This page also carries 1 NTSB event.
- 1 year old
- 1 of 755 Cirrus Design SF50
2025
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N612CB's record changes.
According to the student pilot, he was practicing short-field takeoffs from runway 32, a 3,541-foot-long, 50-foot-wide, asphalt runway. During the second takeoff roll, the airplane turned to the left and the student pilot attempted to correct the left turn with right rudder; however, a cushion was lodged under the rudder pedals. The airplane subsequently departed the left side of the runway, struck a pole and two cars, which resulted in substantial damage to the left wing, firewall, and left horizontal stabilizer. The student pilot reported that there were no mechanical anomalies with the airplane. He further reported 34 hours of total flight experience, which included 7 hours in the same make and model as the accident airplane. An examination of the wreckage by a Federal Aviation Administration inspector revealed a cushion lodged under the left rudder pedal; however, the cushion did not hinder the operation of the rudder. The winds reported at an airport 12 miles to the south of the accident location were calm.
No photos yet. Sign in to add the first one.