N62568Cessna 172S · 2008

The flight instructor and a private pilot receiving instruction stated completed commercial pilot training maneuvers uneventfully and were returning to the airport for a full stop landing. The flight instructor advised the student to fly a higher approach speed due to a right quartering headwind at 10 knots, gusting to 18 knots. As the airplane entered ground effect, the nose was pointed 45° right of runway centerline. The instructor then took control of the airplane, along with the student, and tried to correct; however, the airplane drifted left of the runway. The instructor initiated a go-around, but the airplane pitched up, yawed left, and impacted a grass area consistent with an aerodynamic stall. It sustained substantial damage to the fuselage and both wings. The instructor added that she lost control of the airplane and that there were no preimpact mechanical malfunctions.

The flight instructor stated that after an uneventful local flight in the practice area, the student pilot and he returned to the airport for some landings. During the student pilot’s first landing, he flared too high and went around. The flight instructor demonstrated the subsequent landing and takeoff. He then transferred control of the airplane back to the student pilot, who flew the next traffic pattern and landing attempt. During the landing flare, the student pilot "abruptly" moved the yoke full forward. “My reaction time was not sufficient to completely correct the control inputs, which resulted in a hard nose wheel landing, followed by a pronounced bounce." The flight instructor aborted the landing, and the airplane performed as normally expected. The flight instructor then requested that the tower controllers look at the nose landing gear in flight and they reported no anomalies. After landing, the flight instructor realized that the nose wheel was flat. Upon further inspection by maintenance personnel, it was discovered that the engine firewall was wrinkled and required major repair.