N6305S is a Cessna 150G. It is a fixed-wing single-engine aircraft with 2 seats, powered by a Cont Motor 0-200 series rated at 100 horsepower. The registration is active, with the registrant based in Colorado Springs, CO. Its standard airworthiness certificate was issued in Jul 1967. It has been registered to its current owner since Sep 2024. This page also carries 1 NTSB event.
2024
1967
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N6305S's record changes.
On March 21, 2026, about 1023 mountain daylight time, a Cessna 150G airplane, N6305S, was substantially damaged when it was involved in an accident near Ellicott, Colorado. The pilot sustained serious injuries. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.
The pilot reported that he recalled completing a preflight inspection, a before takeoff engine run-up, and taxing onto the runway for takeoff. He did not recall any portion of the accident sequence.
A witness stated that the pilot intended to conduct some takeoffs and landings for currency. The pilot departed toward the south, and the takeoff appeared normal. The airplane went out of sight behind a hangar. However, when he regained sight of it, the airplane was on an easterly heading and in an approximate 60° left bank.
The airplane subsequently impacted the ground near wings level. It came to rest on a northeast heading about 100 ft before the departure end of the runway and about 500 ft left of the centerline. The airplane sustained damage to the fuselage, empennage, and both wings.
Airframe and engine examinations are planned.
Figure 1 – Airplane at accident site (Police department photo)
No photos yet. Sign in to add the first one.