N711XC is a 2016 Cub Crafters CC19-180. It is a fixed-wing single-engine aircraft with 2 seats, powered by a Lycoming O-360-C1G rated at 180 horsepower. The registration is active, with the registrant based in Wasilla, AK. Its standard airworthiness certificate was issued in Oct 2016. It has been registered to its current owner since May 2024. This page also carries 1 NTSB event.
- 10 years old
- 1 of 43 Cub Crafters CC19-180
2024
2016
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N711XC's record changes.
The pilot receiving instruction in the tailwheel-equipped airplane reported that, during the landing roll, the airplane veered to the left. He applied right rudder and brake to correct, but the airplane continued to veer to the left. In an attempt to maintain directional control, he added power with left rudder and brake. Subsequently, the flight instructor pulled the engine power back and applied right rudder, but the airplane continued to the left and the right wing impacted the ground.
The airplane sustained substantial damage to the right wing and aileron.
The pilot reported that the airplane previously had a tendency to veer to the left during the landing roll. He further reported that, repairs were made during a recent annual inspection and noted that "thicker brake spaces" had been installed.
The instructor reported in a telephone conversation that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.
The flight instructor failed to submit the National Transportation Safety Board Form 6120.1 Pilot/Operator Aircraft Accident/Incident Report.
No photos yet. Sign in to add the first one.