N718CC is a Cub Crafters CC11-100. It is a fixed-wing single-engine aircraft with 2 seats, powered by a Cont Motor O-200A rated at 100 horsepower. The registration is active, with the registrant based in Bloomville, OH. Its experimental airworthiness certificate was issued in Jun 2011. It has been registered to its current owner since Jan 2023. This page also carries 1 NTSB event.
2023
2011
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N718CC's record changes.
The pilot of the tailwheel equipped airplane reported that, while on final approach, the airplane was a little high, so he extended a notch of flaps. The airplane touched down slightly faster than normal and the airplane bounced. The pilot added power to maintain level flight, but a "strong and unexpected crosswind gust" pushed the airplane to the right. He initiated a go-around, but the airplane drifted to the right towards a row of trees at the end of the runway. The pilot attempted to maneuver the airplane around these obstacles, but the right wing struck a tree, the airplane descended and impacted terrain.
The airplane sustained substantial damage to the left wing and fuselage.
The pilot reported that there were no mechanical failures or malfunctions with the airplane that would have precluded normal operation.
The pilot did not submit the NTSB Pilot/Operator Aircraft Accident/Incident Report Form 6120.1.
No photos yet. Sign in to add the first one.