N767CC is a 2010 Cub Crafters CC18-180. It is a fixed-wing single-engine aircraft with 2 seats, powered by a Lycoming O-360-C4P rated at 180 horsepower. The registration is active, with the registrant based in Wheeling, IL. Its standard airworthiness certificate was issued in Oct 2010. It has been registered to its current owner since Jul 2026. This page also carries 1 NTSB event.
- 16 years old
- 1 of 52 Cub Crafters CC18-180
2026
2010
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N767CC's record changes.
The pilot receiving instruction in the tailwheel-equipped airplane reported that, during the landing roll of a touch and go landing, he added slight right correction followed by left correction. The airplane veered to the left, the pilot added full right rudder, but the airplane ground looped to the left. The right main landing gear collapsed and the right wing struck the ground.
The airplane sustained substantial damage to the right wing.
The flight instructor reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.
The automated weather observation station located on the airport reported that, about 37 minutes after the accident, the wind was from 170° at 6 knots. The same automated station reported that, about 23 minutes after the accident, the wind was from 170° at 6 knots. The pilot landed the airplane on runway 27.
No photos yet. Sign in to add the first one.