N782JRCirrus Design SR20 · 2016

The pilot reported that, during landing, the wheels touched down but lifted off the runway. The airplane floated and drifted left of centerline. He then heard the stall horn, the wheels touched down again, and the airplane veered left, exited the runway and struck a pole.

The airplane sustained substantial damage to the left wing.

The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

The automated weather observation station located on the airport reported that, about the time of the accident, the wind was 220° at 5 knots. The airplane landed on runway 01.

The flight instructor was conducting an instructional flight in the airplane, which was owned by the student pilot. The flight instructor reported that he did not notice that the student pilot did not set the flaps to the appropriate position for takeoff, as required on the before takeoff checklist. Immediately after rotation, during the initial climb, the student pilot had difficulty maintaining directional control. The flight instructor took control of the airplane about 10 ft above the runway, the stall warning annunciator was audible, and the airplane began sinking. The flight instructor pushed the nose over but was unable to recover before the airplane landed hard and then departed the right side of the runway. The landing gear dug into the mud, the airplane then spun around and the nose gear and left main landing gear collapsed, which resulted in substantial damage to the elevator and vertical stabilizer. The flight instructor reported that there were no preimpact mechanical failures or malfunctions with the airplane that would have precluded normal operation.