N7969C is a North American SNJ-5. It is a fixed-wing single-engine aircraft with 2 seats, powered by a P&W R1340 series rated at 600 horsepower. The registration is active, with the registrant based in Van Nuys, CA. Its standard airworthiness certificate was issued in Oct 1958. It has been registered to its current owner since Aug 2015. This page also carries 2 NTSB events.
2015
1958
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N7969C's record changes.
On October 23, 2018, about 1344 Pacific daylight time, a North American SNJ-5 airplane, N7969C, was destroyed when it was involved in an accident near Agoura Hills, California. The pilot was not injured. The airplane was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 personal flight.
The pilot reported that, shortly after departure, he heard two loud bangs, followed by total loss of engine power, and he performed a forced landing to a highway. After touchdown, the airplane swerved to the left, the left wing impacted a concrete divider, and a postimpact fire ensued.
The airplane was equipped with an R-1340-AN1 nine-cylinder, radial engine. Examination of the engine showed that the No. 2 cylinder was cracked between the 10th and 11th (from bottom of head) cylinder head cooling fin. Another crack on the No. 2 cylinder extended from the sparkplug to the base of the head. Additional damage was noted at the base between the Nos. 4 and 5 cylinders, and on the No. 1 cylinder. Disassembly showed that the No. 5 master cylinder rod end had failed on the piston side. Examination of the master rod end by the NTSB Materials Laboratory showed a fracture initiation region on the I-beam shaft, based on fine chevron and river pattern markings. The fracture surface in the immediate origin region was damaged due to mechanical contact during the failure sequence. A higher magnification image of the fracture surface adjacent to the origin region exhibited striation features typical of fatigue crack growth in hardened steel.
The pilot reported that as the tailwheel was contacting the ground, a "sudden gust of wind" lifted the right wing and the airplane weathervaned to the right. Subsequently, the airplane ground looped and exited the right side of the runway.
The airplane sustained substantial damage to the left wing and aileron.
The pilot reported that there were no pre-accident mechanical failures or malfunctions with the airplane that would have precluded normal operation.
The automated weather observation system on the accident airport, about the time of the accident, reported the wind at 270° at 9 knots. The pilot landed on runway 16.
No photos yet. Sign in to add the first one.