N831MS is a Dassault Aviation FALCON 2000EX. It is a fixed-wing multi-engine aircraft with 19 seats. The registration is active, with the registrant based in North Salt Lake, UT. It has been registered to its current owner since Jun 2026. This page also carries 2 NTSB events.
2026
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N831MS's record changes.
The student helicopter pilot reported that he was practicing hovering, pedal turns, and ground taxiing in the ramp area. As he slowed for landing at the conclusion of the flight, the helicopter settled more than anticipated and the right skid touched the pavement. The student pilot immediately lost control of the helicopter and the helicopter rolled onto its side, incurring substantial damage. The student pilot did not report any anomalies with the helicopter prior to the accident.
The owner/builder of the Rotorway 162F was performing pedal turns while conducting initial flight tests. During a turn the left pedal "popped" and "fell away." He immediately dropped the collective and landed hard, causing significant damage to the tail boom. He inspected the helicopter and discovered the foot pedal scissor beam had pulled away from its retaining bolt. The scissor beam was designed to be sandwiched between two nylon pivot bushings, and retained by an aluminum bushing and bolt. During the construction phase he inadvertently mounted the aluminum bushing on the inside of the scissor beam, allowing the beam to be pulled past the mounting bolt when pressure was applied.
No photos yet. Sign in to add the first one.