N874CC is a 2001 Piper/Cub Crafters PA-18-150. It is a fixed-wing single-engine aircraft with 2 seats, powered by a Lycoming O&VO-360 SER rated at 180 horsepower. The registration is active, with the registrant based in Casper, WY. Its standard airworthiness certificate was issued in Jul 2001. It has been registered to its current owner since Jul 2024. This page also carries 1 NTSB event.
- 25 years old
- 1 of 47 Piper/Cub Crafters PA-18-150
2024
2001
That's everything on file so far — TailWiki checks the FAA registry daily and adds new entries as N874CC's record changes.
In a written statement, the pilot reported that he had to circle the destination airport numerous times in an effort to lose altitude. The airplane touched down about 200 feet from the approach end of the landing strip and bounced. He maneuvered the airplane back down, but then decided to perform a go-around. He applied full engine power and collided with a fence during the initial climb.
In the section titled "RECOMMENDATION" in the NTSB Pilot/Operator Report, form 6120.1, the pilot stated that the accident could have been prevented if he didn't attempt to land at the airport, or landed softer. The pilot reported that there were no pre impact mechanical malfunctions or failures with the airplane. As a result of the accident, the airplane incurred damage to the firewall and wings.
No photos yet. Sign in to add the first one.